HondaLogger

HondaLogger is datalogging software which datalogs from the ECU using a laptop connected to the interface box. Datalogging recording can be saved so that they can be viewed later on for analysis. HondaLogger is an invaluable diagnostic tool for your car, allowing you to load and save recordings, graph and compare sensor values and diagnose error codes.

Features:

• Over 40 channels (or sensors) can be datalogged.
• Datalogging speed of 900-1000 samples/second with a modern laptop.
• Typically 6+ hrs recording time.
• Real time sensor display.
• Datalogging can be saved, loaded and re-played.
• Sensors can be graphed.
• Error codes can be read and reset from the laptop.

Download a working version of this software with an example recording from a 10 lap circuit race. 

Virtual Dashboard

A virtual dashboard shows sensors in real time as they are datalogged, or as a recording is played back. When playing back a datalogging recording the playback position can be paused or moved forward and backwards.

Graphing

Sensors can be added to a strip graph.  The graph can be zoomed in and out, and moved around to different portions of the recording. While datalogging or playing back a recording the graph window will follow the digital dashboard.

Requirements

• Hondata s200 with datalogging enabled (or stage 4, or stage 2 or 3 with datalogging option).
• Windows 95, 98, NT, 2000 or XP
• Pentium 133 with 16 MB minimum.
• Pentium 400 with 64 MB recommended.

HondaLogger will run on lower specification laptops, but recording speed will be reduced.  Because the laptop is used to store the data from the ECU, recording time is essentially unlimited. In practice 4-6 hours can be recorded on most laptops without problems.

PalmLog

PalmLog is a Hondata datalogging application written to run on Palm OS® Handhelds.  It will datalog from the s200 system only.