• VTEC point decreased from 6000 rpm to 5600 rpm
• VTEC window from 5600 to 6400 rpm.
• Rev limit 8500 rpm
• Maximum torque gain 14 ft/lbs torque at 5800 rpm
• Maximum power gain 16 hp at 5800 rpm
• Fully dealer compatible - works with all Honda scan tools and equipment

This reflash will work very well with an 06-08 S2000 in stock form, or with intake and exhaust. This reflash is now incorporated into the FlashPro for the S2000 - a recommended tunable alternative.

Pricing

• $295

Hondata does not sell direct - all sales and payment must be conducted through Hondata dealers. The upgrade information form must be sent with your ECU.

Results for 06 S2000 with exhaust and Hondata Heatshield gasket

• Dotted purple line - Reflashed ECU
• Dotted green line - Stock ECU

Click to enlarge picture

Tuning Notes.

The 06 S2000 is the first S2000 by Honda to have a programmable ECU. Our observations are that this is a very well tuned car from the factory. There were no peak power gains, but by raising the rev limit will increase the average power available when you shift at the rev limit.

The VTEC transition is much smoother than before. Peak torque may look as if has been reduced slightly, but this is an artifact of the dyno trying to catch the engine accelerating after the VTEC switch point.

VTEC Window

The VTEC window operates between 5600 and 6400 rpm.

• At sea level the VTEC point is 5600 RPM.
• Under 5600 RPM the engine is always on the low cam
• Over 6400 RPM the engine is always on the high cam

As you increase in altitude and the air pressure drops, the VTEC point will rise from 5600 to 6400 rpm. If you live permanently at a high altitude, then this reflash may not be effective for you.

Who can use this upgrade?

Any USA 06 through 08 S2000 with the ECU part numbers found on the bar code on the side of the ECU:

• 37820-PZX-A09 through A21

How do I get the reflash

You will need to remove the ECU and via a dealer send it to Hondata. Unlike reflashes for other Honda models you will not need to send the key and immobilizer; just the ECU. Fill out this form and contact a Hondata dealer. Hondata does not sell direct.

What If I want to add parts later

We have developed a reflash to work with the TODA header. The upgrade price is $200.

Can I use an 2006 ECU in my 2000-2005 vehicle?

This is not easy nor cheap, and we do not offer support for such a swap - at the least the engine sensors, sensor wheels, throttle body, ECU, vehicle harness, ECU harness, dash harness and cluster would need to be changed.

How do I remove my ECU?

The ECU is located behind plastic panels to the left of the driver's left foot. You will need a 10mm socket. This is what it looks like - in place and removed from the car.

Technical

The intakes manifold on the S2000 series engines get very hot. They have a metal intake gasket which transfers heat from the head very quickly. Pay lots of attention to keeping everything cool and you will see results. The S2000 Hondata intake gasket reduces intake temps about 15-40 degrees F, adds 2-4 ft pounds of torque and 4-5 peak HP.